STEERING
pos. Description Type Quantity Torque Notes
1 Headstock ring nut - pre-tightening M25x1 1 60 Nm (44.25 lbf ft) Unscrew after pre-
tightening
1 Headstock ring nut - tightening M25x1 1 50 Nm (36.88 lbf ft) -
2 Headstock cap M22x1 1 100 Nm (73.75 lbf ft) -
3 TCEI screw fastening fork legs to
bottom yoke
M8x35 4 25 Nm (18.44 lbf ft) -
4 TCEI screw fastening U-bolt onto
fork yoke
M10x60 2 50 Nm (36.88 lbf ft) -
5 TCEI screw fastening fork legs to top
yoke
M8x30 2 25 Nm (18.44 lbf ft) -
6 Headstock counter-lock ring M25x1 1 - Tighten by hand
Removing the fork legs
•
Remove the front wheel.
•
Support the stanchion and loosen the
screws on the upper and then the lower
plate.
•
Remove the stanchion.
DORSODURO 1200 ABS - ATC Suspensions
SUSP - 307