•
Fit the entire fork upper plate, adjusting
with short taps with a rubber hammer
•
Fit the washer and tighten the upper
plug to the specified tightening torque.
STEERING UPPER PLATE
pos. Description Type Quantity Torque Notes
2 Headstock cap M22x1 1 100 Nm (73.75 lbf ft) -
3 TCEI screw fastening fork legs to
bottom yoke
M8x35 4 25 Nm (18.44 lbf ft) -
4 TCEI screw fastening U-bolt onto
fork yoke
M10x60 2 50 Nm (36.88 lbf ft) -
5 TCEI screw fastening fork legs to top
yoke
M8x30 2 25 Nm (18.44 lbf ft) -
6 Headstock counter-lock ring M25x1 1 - Tighten by hand
•
Tighten the fixing screws of the upper
plate to the prescribed tightening tor-
que.
When refitting the U-bolt, position the two referen-
ces facing the front part of the vehicle.
Suspensions DORSODURO 1200 ABS - ATC
SUSP - 322
To Next Page
Loading...
Need help?
General
