HEAD COVER FITTING
•
Installation operations apply to both
head covers.
•
Ensure gasket is in good conditions. If
required, change it and use a gasket
having the same features.
•
Fit the cover.
•
Fit the rubber blocks in their seats.
•
Start and tighten the five screws to the
prescribed torque working diagonally
and in stages.
Front head
Removing camshafts
•
Remove the head cover.
•
Unscrew and remove the two screws.
•
Remove the coolant fitting.
•
Disconnect the coolant breather pipe.
See also
Head cover removal
DORSODURO 1200 ABS - ATC Engine
ENG - 241
To Next Page
Loading...
Need help?
General
