•
Remove the counterweight and de-
compression device with the relevant
spring.
•
To refit, engage spring on decompres-
sion device and preload it by one turn.
•
Install the counterweight and engage
the preloaded device to it.
•
Tighten the counterweight fixing
screw.
Installing camshafts
The camshaft refitting procedure is described in the "Timing" section.
See also
Timing
Rear head removal
•
Remove the magneto flywheel.
•
Unscrew and remove the screw and
collect the washer and the internal
spring.
Engine DORSODURO 1200 ABS - ATC
ENG - 250