•
Remove the rotation locking pin from
the oil pump control gear.
Check the clutch bell for damage and wear that may result in clutch irregular operation. Deburr the teeth
or replace the bell.
MAIN DRIVEN GEAR CHECK
Check the main driven gear for damage and wear and, if necessary, replace the main transmission
driving gear and the clutch bell all together.
Make sure there is not excessive noise during operation; if necessary, replace the main transmission
driving gear and the clutch bell all together.
Checking the pusher plate
Check the thrust plate and the bearing for damage
and wear. If necessary, replace the parts.
Checking the clutch hub
Check the clutch hub for damage and wear that
may result in clutch irregular operation. If neces-
sary, replace the bell.
Engine DORSODURO 1200 ABS - ATC
ENG - 234