•
Slide off the dust scraper from the
sleeve using a screwdriver as a lever.
•
During this operation, pay attention not
to damage the sleeve rim.
•
Remove the retainer ring.
•
Take out the sleeve from the stem using the stem as a hammer puller.
•
Remove the fixed bushing (1), the
movable bushing (2), the ring (3) and
the oil seal (4) from the stem.
•
Remove the lock seeger ring of the
spring guide.
•
Remove the spring guide.
DORSODURO 1200 ABS - ATC Suspensions
SUSP - 311