Operation Mode
Operator's Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-OPERATE/FGB Rev. B, 2009-10-28,
Autronica Fire and Security AS
Page 16
3.4 Alarm Levels
A detector may signal different levels of alarm, indicating the amount
of smoke or gas currently present. These are;
Fire Alarm Level (the highest level)
Pre Alarm Level
Whenever a detector detects a transition from one alarm level to
another (from lower level to the highest level), this event is reported to
the system as a Pre Alarm or Fire Alarm signal, which in turn will
initiate the appropriate actions.
3.5 Access Levels
All user interface controls are classified as belonging to one of the
three different access levels described below:
Access
Level
Access Description
1 No key or password
required
Accessible by members of the general public. All mandatory
indications are visible at access level 1 without prior manual
intervention. The normal operation mode is the default setting
for the panel.
2 Access by key
Accessible by persons with a specified responsibility for safety.
3 Password restricted Accessible by persons trained and authorized to do
reconfiguration of site specific data and maintenance
according to the manufacturer’s published instruction.
If no action has been performed in this level within one hour
the panel will either return to Access Level 1 or Access Level 2
depending on whether the key has been used.
To Next Page
Loading...
Need help?
General
