Autronica Autroprime User Manual

Enabling
Operator's Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-OPERATE/FGB Rev. B, 2009-10-28,
Autronica Fire and Security AS
Page 51
13. Enabling
13.1 Introducion
From the Enable menu you can enable the following components :
 Detection Zone
 Alarm Zone
 Point (detectors, manual call points)
 Fire Alarm Device (FAD)
 Loop Outputs
 Local Outputs
 Loop Inputs
 Local Inputs
 Routing Equipment (FARE/FWRE)
 Loop IO Carriers
It is also possible to change the time span for the component.
In addition, it is possible to use the command enable Delayed
Activation, meaning that you can enable (or disable) all delays that are
defined in the system.
13.2 Enable Menu
Detection Zones
Alarm Zones
Points
Fire Alarm Devices
Loop Outputs
Local Outputs
Loop Inputs
Local Inputs
Routing Equipment
Loop IO Carriers
Delayed Activation
Enable

Autronica Autroprime Specifications

General

Brand	Autronica
Model	Autroprime
Category	Fire Alarms
Language	English