Autronica Autroprime User Manual

System Status
Operator's Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-OPERATE/FGB Rev. B, 2009-10-28,
Autronica Fire and Security AS
Page 44
11. System Status
11.1 Introduction
The System Status menu is accessed from the main menu in Menu
Mode. The System Status Menu is accessed with access level 1 (no
key or password required).
The menu gives the current status of the following conditions:
 Alarms
 Pre Alarms
 Faults
 Disablements
 Tests
 Supervisory
 Activated Outputs/Inputs
11.2 System Status Menu
System Status Show Alarms
Show Pre Alarms
Show Faults
Show Disablements
Show Tests
Show Supervisory
Show Activated Outputs/Inputs
Door Control Units
Standard Control Units
Activated Fire Alarm Devices
Other Outputs
Activated Inputs
All Outputs/Inputs by Type
All Outputs/Inputs by Time
11.3 Example – System Status, Alarms
In this example, we assume that 3 points are in alarm state.
 To enter the Menu Mode from operation mode or the panel’s idle
state, press and hold down the Enter button
for a few seconds.
NOTE:
Access Level 1
(no key or
password
required).

Autronica Autroprime Specifications

General

Brand	Autronica
Model	Autroprime
Category	Fire Alarms
Language	English