Autronica BS-310 User Manual

Show Status
Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FO/FE Rev. E, 021105,
Autronica Fire and Security AS
Page 52
10. Show Status
10.1 Introduction
The Show Status menu is accessed from the main menu in Menu
Mode.
The menu gives the current status of the following conditions:
• Fire Alarms
• Fire Warnings
• Faults
• Disablements
• Detection Zones in test
• Oil & Gas Inhibited Points (Functionality for the Oil & Gas Market)
• Activated Outputs
10.2 Show Status Menu
Fire Alarms
Fire Warnings
Faults
Show Status
Fire Alarm Devices
Fire Alarm Routing Equipment
Detection Zones
Points
Immediate Output Actioning
Outputs
Fault Warning Routing Equipment
Disablements
All
Detection Zones in Test
Activated Outputs
Standard Control Units
Other Outputs
Door Control Units
Low Location Light Units
All
Oil & Gas Inhibited Points
Fire Alarms
Fire Warnings
Faults
Show Status
Fire Alarm Devices
Fire Alarm Routing Equipment
Detection Zones
Points
Immediate Output Actioning
Outputs
Fault Warning Routing Equipment
Disablements
All
Detection Zones in Test
Activated Outputs
Standard Control Units
Other Outputs
Door Control Units
Low Location Light Units
All
Oil & Gas Inhibited Points
Figure 10-1: Show Status Menu
www.ukpanels.com

Autronica BS-310 Specifications

General

Brand	Autronica
Model	BS-310
Category	Fire Alarms
Language	English