Action Button Presses
Exit Stealth mode Press Volume Up p or Volume Down q for three seconds*
Pairing Press Event+ Select simultaneously
Power off Press Power for three seconds
Power on Press Power until short vibration
Speaker volume Press Volume Up p or Volume Down q
Start recording Double-press Event
Toggle light setting Press Volume Up p for three second, then tap to toggle modes
Use Programmable
Button 1
Double-press Programmable Button 1 (default: Watch Me)
Use Programmable
Button 2
Single-press or long-press Programmable Button 2, depending
on how device behavior is set
* The camera remembers the previous volume and light settings when exiting Stealth mode.
For details on screen icons and meanings of both the top Operation and front Triad
LEDs, see Icons, LEDs, and sounds on page 33.
To change the function of the Programmable Button 1, in Axon Evidence go to Admin
> Body 4 > Programmable Buttons. Other functions include:
l
No Function
l
Sleep
l
Stealth
l
Upload Last Video
l
Watch Me
Programmable Button 2 – To change the function of the Programmable Button 2, in
Axon Evidence go to Admin > Body 4 > Programmable Buttons. Other functions
include:
l
No Function
l
Select (can be used for Marker and Mute)
l
Photo Marker
l
Audio Mute
POV Connector Port – Used to connect the POV and body camera together via the
POV Cable. All Axon Body 4 Cameras ship with a plastic cover over the port. If a
camera will not be using the POV, leave this cover on to protect the port.
Axon Enterprise, Inc. 7
Body 4 Camera User Guide
To Next Page
Loading...
Need help?
General
