Use camera controls
Press Volume Up p for three seconds. When you see the light setting appear on the
screen, press Volume Up p or Volume Down q to toggle to the desired light setting.
The Lights out icon appears on the display if you toggle the lights off.
Use Axon View
Open Axon View app on your mobile device and go to Settings.
Tap the switch to the right of Indicator Lights to change the setting.
Change camera vibration
During normal operation, the camera uses vibrations (haptic feedback) to notify you of
the camera status.
Use Axon View to turn camera vibrations off and on.
1. Open the Axon View app on your mobile device and go to Settings.
2. Tap the switch to the right of Vibration to change the setting.
Stealth mode
For some situations, you may wish to turn off the LEDs, sounds (audio prompts), and
vibrations (haptic feedback) on your Axon camera. Turning off all the indicators and
notifications is known as Stealth mode.
There are two ways to enter and exit Stealth mode.
Use camera controls
l
To enter Stealth mode – Press Volume Down q for three seconds. The word
STEALTH shows briefly on the camera display activity area and an S icon appears
in the display.
l
To exit Stealth mode – Press Volume Up p or Volume Down q for three seconds.
The S icon disappears from the display.
Use Axon View
1. Open the Axon View app on your mobile device and go to Settings.
2. Tap the switch to the right of Stealth mode to change the setting.
Axon Enterprise, Inc. 11
Body 4 Camera User Guide
To Next Page
Loading...
Need help?
General
