Charge without a dock
To charge the camera when no dock is available, use a USB-C cable. You should still
regularly place your camera in its dock to ensure it has the correct time
synchronization and receives the latest firmware updates.
Axon Body 4 can be charged using any USB-C cable.
1. Connect the camera to the USB-C cable.
2. Connect the cable to a power adapter or USB port. A power adapter generally
provides more charging power than a device’s USB port.
Note
Ensure the USB port is dry and free of debris before connecting the
cable.
l
If the camera was off, it enters low-power mode and the current charge level
appears on the camera display. When you remove the cable, the camera turns
off. During charging, power the camera on normally at any time and it enters
Ready mode (buffering).
l
If the camera was on, it remains on with the charging icon beside the battery.
When you remove the cable, the icon disappears and the camera remains on.
The color of the Operation LED on top provides a visual indication of the charge level.
The LED is red when the charge level is 10% or less, yellow when it’s 11–89%,
and green at 90% or higher.
Internal clock
Place your camera in an Axon dock or connect it to View XL Standalone mode to
update the camera’s internal clock.
Moisture
Don’t charge your camera while the USB-C connector on the camera or dock is wet.
The camera will display a moisture icon if it detects moisture in the USB-C port.
Axon Enterprise, Inc. 46
Body 4 Camera User Guide
To Next Page
Loading...
Need help?
General
