Baur DTA 100 C User Manual

DTA 100 C Device settings
822-129-8 35 / 90
8.4 Overwrite measurement logs
The device can store up to ten measurement logs. When the measurement log memory is
full, old measurement logs must be deleted before you can save new ones. Under Clear
meas. logs you can define how to proceed when the measurement log memory is full and a
measurement is to be performed.
Main menu > Device settings > Clear meas. logs
1. Choose one of the following settings by pressing the arrow keys.
 yes: When you start the next measurement log, the oldest measurement log will be
automatically deleted.
 no: Before starting the next measurement log, a saved measurement log must be
deleted manually.
Further information: Chapter Display of measurement results (on page 64)
2. Click Save to confirm the entry.
8.5 Configure the IEC 60156:2018 settings
According to the standard IEC 60156:2018, its Annex A and the standards based on
IEC 60156:2018, it is possible to adjust the hold time prior to the first measurement, various
stirrer settings and electrode shapes. The settings configured under this menu item are
applied automatically for the following standards:
 IEC 60156:2018
 IEC 60156:2018 Annex A
 AS 1767.2.1
 BS EN 60156
 CEI EN 60156
 SEV EN 60156
 UNE EN 60156
 NF EN 60156
 SABS EN 60156
 VDE 0370-5:1996

Baur DTA 100 C Specifications

General

Brand	Baur
Model	DTA 100 C
Category	Test Equipment
Language	English