Baur DTA 100 C User Manual

DTA 100 C Transportation and storage
822-129-8 81 / 90
NOTICE
Damage to the device caused by improper transportation and incorrect storage
 Always transport and store the device as intended.
 Comply with the ambient conditions specified in the technical data for this
device.
18.1 Packaging
1. Keep the original packaging because it provides the best protection for your oil
breakdown voltage tester during transportation.
2. If you would like to dispose of the packaging, ensure you comply with the applicable
national regulations when doing so.
18.2 Transportation
If you are sending the oil breakdown voltage tester to BAUR GmbH, a BAUR representative
or to the Technical Service for repairs or any other reason, ensure the following:
 The DTA 100 C oil breakdown voltage tester weighs up to 39 kg. It is recommended to
seek the help of another person to lift or carry the device.
 To avoid damage during transportation or as a result of faulty packaging, it is best to use
the original packaging.
If none of the original packaging is available, select packaging that is strong enough to
protect against mechanical damage and the ingress of liquids.
 The oil breakdown voltage tester must be transported and shipped on a pallet.
Note: The transport case does not constitute shipping packaging. Do not ship the oil
breakdown voltage tester in the transport case without a pallet.
18 TRANSPORTATION AND STORAGE

Baur DTA 100 C Specifications

General

Brand	Baur
Model	DTA 100 C
Category	Test Equipment
Language	English