Baur DTA 100 C User Manual

DTA 100 C Device settings
822-129-8 43 / 90
8.9 Set time
Main menu > Device settings > Time
1. Select the position by pressing the arrow keys.
2. Change the time with the membrane keypad.
3. Click Save to confirm the entry.
8.10 Reset settings
Note: This menu item resets all settings to the factory defaults. All user-defined
measurements and measurement logs will be deleted!
Main menu > Device settings > Reset settings
1. Select the menu item by pressing the arrow keys.
2. Click Next to confirm the entry.
A warning is displayed that all settings and user data will be deleted upon resetting the
settings.
3. Confirm with Yes.

Baur DTA 100 C Specifications

General

Brand	Baur
Model	DTA 100 C
Category	Test Equipment
Language	English