Baur DTA 100 C User Manual

About this manual DTA 100 C
6 / 90 822-129-8
1.1 Using this manual
This user manual contains all necessary information that is needed for the commissioning
and operation of the described product.
 Read this user manual completely before operating the product for the first time.
 Consider this user manual to be a part of the product and store it in an easily accessible
location.
 If this user manual is lost, please contact BAUR GmbH or your nearest BAUR
representative (http://www.baur.eu/baur-worldwide).
1.2 Applicability of the instructions
These operating instructions apply to the DTA 100 C with the firmware version from 1.16.
The details of the firmware version currently installed can be found under:
Main menu > Tools > Info
1.3 Structure of safety instructions
The safety instructions in this user manual are presented as follows:
Danger
symbol
SIGNAL WORD
Type of danger and its source
Possible consequences of violation.
 Measure to prevent the danger.
If a dangerous situation could arise at a specific step, the safety instruction is displayed
immediately before this dangerous step and is shown as follows:
SIGNAL WORD
Type of danger and its source. Possible consequences of violation.
1. Measure to prevent the danger.
1 ABOUT THIS MANUAL

Baur DTA 100 C Specifications

General

Brand	Baur
Model	DTA 100 C
Category	Test Equipment
Language	English