Chapter 8
8-2
8.3 Error Table
8.3.1 Errors
0014-9440
The codes correspond to the numbers shown on the DISPLAY in the service mode.
T-8-3
01810309-140B Ink tank is empty. Replace the ink tank. B ink tank is empty
01810308-140C Ink tank is empty. Replace the ink tank. G ink tank is empty
01810104-1410 No ink tank loaded. Check ink tank. BK ink tank is not loaded (when printing)
01810101-1411 No ink tank loaded. Check ink tank. Y ink tank is not loaded (when printing)
01810102-1412 No ink tank loaded. Check ink tank. M ink tank is not loaded (when printing)
01810103-1413 No ink tank loaded. Check ink tank. C ink tank is not loaded (when printing)
01810112-1414 No ink tank loaded. Check ink tank. PM ink tank is not loaded (when printing)
01810113-1415 No ink tank loaded. Check ink tank. PC ink tank is not loaded (when printing)
01810106-1416 No ink tank loaded. Check ink tank. MBK ink tank is not loaded (when printing)
01810105-1418 No ink tank loaded. Check ink tank. GY ink tank is not loaded (when printing)
01810115-1419 No ink tank loaded. Check ink tank. PGY ink tank is not loaded (when printing)
01810107-141A No ink tank loaded. Check ink tank. R ink tank is not loaded (when printing)
01810109-141B No ink tank loaded. Check ink tank. B ink tank is not loaded (when printing)
01810108-141C No ink tank loaded. Check ink tank. G ink tank is not loaded (when printing)
01031101- Close Ink Tank Cover Ink tank cover is opened (when printing)
01341221-1030 GARO W1221 Unsupported command in GARO image mode
01341222-1031 GARO W1222 Invalid number of parameters in GARO image mode (no parameter)
01341223-1032 GARO W1223 Required item was omitted in GARO image mode
01341225-1034 GARO W1225 Other warning in GARO image mode
01341231-1035 GARO W1231 Unsupported command in GARO setting mode
01341232-1036 GARO W1232 Invalid number of parameters in GARO setting mode
01341233-1037 GARO W1233 Reauired item was omitted in GARO setting mode
01341234-1038 GARO W1234 Data out of range in GARO image mode
01341235-1039 GARO W1235 Other warning in GARO setting mode
00000000-100F Feed Limit.. Force feed limit
01800500-1012 Check printed document. Printhead R not discharging
01800500-1013 Printhead L not discharging
01060000- Paper Size Wrong Media size missmatch
01061000-1021 Paper Type Wrong Media type missmatch
Prepare for parts replacement. Call for service. Parts counter warning level 1 (W1)
Parts replacement time has passed. Call for service. Parts counter warning level 2 (W2)
Code Status
03010000-200A Media width detection error
03010000-200B Media set position error
03010000-200C Media leading edge not detected
03010000-200D Cut sheet end cannot be detected
03010000-200E Media too small
03010000-200F Media too large
03010000-2016 Media became misaligned during feeding
03010000-2017 Media right edge not detected
03010000-2018 Media left edge not detected
03010000-2820 Head resistration improper adjustment
03010000-2821 LF improper adjustment
03010000-2822 Eccentricity improper adjustment
03010000-2823 Printhead check error
03010000-2824 Optical axis error
03010000-2E18 Media feeding failure
03010000-2E19
03010000-2E1A
03010000-2E1D
Feed error
03010000-2E1C Ejection error
03010000-2E1F Media is too small to print adjustment pattern
03010000-2E27 Media became misaligned during printing
03010000-2F33 Transparent media was loaded and cannot adjust
03016000-2010 Media skewed
03130000-2E21 IEEE error
03030000-2F29 Feed motor time out
03031000-2E0F Upper cover open error
03031000-2E11 Carriage cover open error
03031000-2E12 Release lever error
Code Display massage Status
To Next Page
Loading...
Need help?
General