------------------------------e
••••
Trouble?
Problem
Solution
CD
Pressing the playback button
Load a cassette.
19
does not start playback.
Set the camcorder to
I>PLAY"J§§I\.
27
Tape reached the end
("[§]
END" appears
on
the screen).
19
Rewind the tape.
No sound from the built-in Open the LCD panel.
-
speaker.
Speaker volume is turned off. Adjust the volume with the
~
27
dial.
When playing back a tape Video heads are dirty. Clean the video heads.
82
recorded
in
HDV standard the
playback is jerky or the sound
stutters
on
and off.
Image will not appear
on
the
Set [AV
..
DV] to [OFF].
33
TV
screen.
Check again that the camcorder
is
properly connected to the
TV
57
When connecting the camcorder to
an
HDTV using the CTC-1 00
57
Component Cable, make sure to select the correct specification
for the [COMPOUT] setting.
There is no sound from the
TV
When connecting the camcorder to
an
HDTV using the CTC-1 00
57
Component Cable, make sure to connect also the audio
connections using the white and red plugs
of
the STV-250N
Stereo Video Cable.
Text displays do not appear
on
If you connected the camcorder to the
TV
using the video
35
the
TV
component connection, set [DV OUTPUT] to [HDV/DV].
Tape
is
running, but image will
TVNIDEO
selector
on
the
TV
is
not set to VIDEO. Set the
59
not appear on the
TV
screen.
selector to VIDEO.
Video heads are dirty. Clean the video heads.
82
You
attempted to play back or dub copyright a protected tape.
62
Stop playback/dubbing.
Memory
Card
Operation
Problem
Memory card cannot be
inserted.
Cannot record
on
the memory
card.
Memory card cannot be played
back.
Image cannot be erased.
"[]
" flashes
in
red.
Solution
Memory card was not facing the correct direction. Turn the
memory card over and reinsert
it.
Memory card is full. Erase still images to free some space or
replace the memory card.
Memory card was not initialized. Initialize the memory card.
The folder and file numbers have reached their maximum value.
Set [FILE NOS.] to [RESET] and insert a new memory card.
Set the camcorder to
IPlAy~r::gil.
Image
is
protected. Cancel the protection.
Card error occurred. Turn off the camcorder. Remove and
reinsert the memory card. Initialize the memory card if flashing
persists.
CD
20
55
56
33
29
55
56
-
To Next Page
Loading...
Need help?
General
Weight and Dimensions
