Checking the Machine’s IP Address
6-4
Appendix
6
Checking the Machine’s IP Address
Follow the procedure below to check the machine’s IP address.
* The System Manager ID and System Password are both set to ‘7654321’ at purchase.
3
Press (Reset) to return to the top screen.
1
Press (Additional Functions)
➞ [System Settings] ➞ [Network
Settings].
NOTE
To access the System Settings, enter
the System Management mode by
entering the System Manager ID and
System Password*. For details, see
Chapter 1, “Before You Start,” in the
System Settings Guide.
2
Press [TCP/IP Settings] ➞ [IPv4
Settings] ➞ [IP Address
Settings].
The IP address settings are displayed.
NOTE
• If the machine’s IP address is yet to
be set, it is displayed as <0.0.0.0>.
• For more information on the IP
address settings, see Chapter 2,
“Connecting the Machine to a TCP/IP
Network,” in the System Settings
Guide.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General