What This Machine Can Do
2-4
Before You Start Using the Machine
2
Remote User Interface
The machine can be connected to a network
using Ethernet. Connecting to a network
enables you to use the Remote UI.
With the Remote UI, you can perform functions
from your computer’s Web browser, such as
confirming the status of the machine and job
operations and making various settings.
Once the Ethernet interface port is configured
properly, the machine can be controlled and set
up from a computer through the Remote UI and
network. (See the Remote UI Guide.)
Security
You can protect the machine from unauthorized
access by setting department/user IDs. If these
IDs are set, only the users who enter the correct
ID and password can gain access to the
machine. (See the System Settings Guide.)
If your network is designed to require user
authentication, the machine offers flexible
solutions as listed below.
-Authorized Send
(See the Sending and Facsimile Guide.)
-IEEE802.1X authentication
-SSL communications
-Secure Printing
(See the System Settings Guide.)
System Monitor
The System Monitor screen enables you to
check the status of the machine and cancel
copy, sending (TX)/receiving (RX), and print
jobs. The job information is recorded as a log
and can be viewed in list form.
You can also check the status of consumables
loaded in the machine.
(See the Reference Guide.)
Web
Browser
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General