IJ Network Tool
IJ Network Tool is a utility that enables you to display and modify the machine network settings. It is installed
when the machine is set up.
Important
• To use the machine over LAN, make sure you have the equipment necessary for the connection type,
such as an access point or a LAN cable.
• Do not start up IJ Network Tool while printing.
• Do not print when IJ Network Tool is running.
• If the firewall function of your security software is turned on, a message may appear warning that
Canon software is attempting to access the network. If the warning message appears, set the security
software to always allow access.
• IJ Network Tool has been verified to work on Windows XP, however, it does not support Fast User
Switching. It is recommended to exit IJ Network Tool when switching users.
Starting up IJ Network Tool
1.
Start up IJ Network Tool as shown below.
• In Windows 8, select IJ Network Tool on the Start screen to start IJ Network Tool. If IJ Network
Tool is not displayed on the Start screen, select the Search charm, then search for "IJ Network
Tool".
• In Windows 7, Windows Vista, or Windows XP, click Start and select All programs, Canon
Utilities, IJ Network Tool, and then IJ Network Tool.
Note
• You can also start up IJ Network Tool by clicking Network Settings from Device
Settings & Maintenance on Quick Menu.
182
To Next Page
Loading...
Need help?
General
