PSK: Passphrase and Dynamic Encryption Setup Screen
Note
• This screen is not available depending on the printer you are using.
Enter the passphrase and select the dynamic encryption method.
1.
Passphrase:
Enter the passphrase set to the access point. The passphrase should be a string of 8 to 63 alphanumeric
characters or a 64-digit hexadecimal value.
If you do not know the access point passphrase, refer to the instruction manual provided with the access
point or contact its manufacturer.
2.
Dynamic Encryption Type
Select the dynamic encryption method from either TKIP (Basic Encryption), or AES (Secure
Encryption) according to the setting of the access point.
210
To Next Page
Loading...
Need help?
General
