Reducing or Enlarging a Copy
You can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.
In the copy mode, press the Menu button, use the button to select Enlarge/Reduce, then press the
OK button.
Use the button to select the reduction/enlargement method, then press the OK button.
Ex:
Note
• Some of the reduction/enlargement methods are not available depending on the copy menu.
• Preset ratio
You can select one of the preset ratios to reduce or enlarge copies.
Use the button to select a preset ratio to match the size of your original document and printing
paper, then press the OK button.
• Magnification
You can specify the copy ratio as a percentage to reduce or enlarge copies.
Use the (-) (+) button or the Numeric buttons to specify the reduction or enlargement ratio (25 -
400%), then press the OK button.
Note
• Press and hold the (-) (+) button to quickly advance through the ratios. For details, see Key
repeat.
• Fit to page
The machine automatically reduces or enlarges the image to fit the page size.
Note
• When you select Fit to page, the document size may not be detected correctly depending on the
original. In this case, select Preset ratio or Magnification.
• When Fit to page is selected, load the document on the platen glass.
406
To Next Page
Loading...
Need help?
General
