When the Printer Driver Is Not Associated with a Port
• If Not Found is displayed for the status, check the followings:
•
The access point is turned on.
• When using wired LAN, the LAN cable is connected properly.
• If the printer on a network is not detected, make sure that the printer is turned on, then select
Refresh. It may take several minutes to detect printers. If the printer is not yet detected, connect
the machine and the computer with a USB cable, then select Refresh.
•
If the printer is being used from another computer, a screen is displayed informing you of this
condition.
Note
•
This item has the same function as Update in the Canon IJ Network Tool screen.
Network Information
Displays the Network Information screen to confirm the network settings of the printer and the
computer.
Network Information Screen
Display Warning Automatically
Enables or disables automatic display of the instruction screen.
When this menu is selected, the instruction screen is displayed if one or more ports are
unavailable for printing.
3.
Settings menu
Configuration...
Displays the Configuration screen to configure settings of the selected printer.
Configuration Screen
Note
• This item has the same function as Configuration... in the Canon IJ Network Tool screen.
Associate Port...
Displays the Associate Port screen and you can associate a port with the printer.
Associate Port Screen
This menu is available when No Driver is displayed for the selected printer. Associating a port
with the printer enables you to use it.
Maintenance...
Displays the Maintenance screen to revert the network settings of the printer to factory default
and to mount the card slot as the network drive.
Maintenance Screen
4. Help menu
Instructions
Displays this guide.
About
Displays the version of IJ Network Tool.
224
To Next Page
Loading...
Need help?
General
