EN-11
Overview and Setup
1.
Press bp FUNCTION and then use the bo dial
to display “Other”.
2.
Press bp ENTER.
3.
Use the bo dial to display “Contrast”.
4.
Press bp ENTER.
This displays the NUM indicator.
5.
Use the bo dial to adjust display contrast.
• The contrast setting range is 01 to 17.
6.
Press bp ENTER to apply your setting.
This causes the NUM indicator to disappear.
7.
To exit the setting screen, press bq TONE.
1.
Press br RHYTHM and bs SONG BANK at the
same time.
This causes (song bank indicator) and (rhythm
indicator) to flash on the display and starts playing of the
demo song. After demo song playback is complete,
demo play will continue with Song Bank songs.
• During demo play, you can use the bo dial to jump to
the beginning of the previous or next song. See the
separate “Built-in Music Data Lists” for a list of Song
Bank titles.
• Demo play will repeat until you perform the operation
in step 2 below.
2.
To stop demo play, press bma or
br RHYTHM and bs SONG BANK at the same
time.
• If Auto Power Off (page EN-9) is enabled, power will turn off
automatically at the applicable trigger time after a period of
non-use, even if demo play is being performed. You can
disable Auto Power Off, if you want. Use the operation
under “Configuring Function Settings” (page EN-45) to
disable function number 64 (AutoOff) in the “Function
Setting Item List” (page EN-46).
Adjusting Display Contrast
Con t r
as t
Listening to Demo Play
To Next Page
Loading...
Need help?
General
Weight and Dimensions
