EN-39
Registering and Restoring a Setup (Registration)
1.
If required, use bt BANK to toggle the freeze
function between enabled and disabled.
• Each long-press bt BANK toggles freeze between
enabled and disabled. The FREEZE indicator is
displayed while freeze is enabled.
• For details about the freeze function, see “Freeze
Function” (page EN-39).
2.
Press bt BANK to select the bank that
contains the setup you want to recall.
3.
Press the button of the area (ck Area 1 to
Area 4) whose registration you want to recall.
This will recall the registration memory setup and
automatically configure the Digital Piano settings
accordingly.
• Notes currently being sounded by the keyboard may stop if
you recall a setup that causes a change in octave shift
(page EN-24). To keep this from happening, either select a
setup that does not cause a change in the octave shift
setting, or hold down the pedal (which will cause notes
currently being played to be sustained).
■ Freeze Function
Recalling a registered setup normally overwrites all of the
settings shown under “Registration Memory Data” (page
EN-38).
You can also use the freeze function (Registration Memory
Freeze Target) to specify particular settings that should not be
overwritten when a setup registration is recalled.
Use the procedure under “Configuring Function Settings”
(page EN-45) to specify “On” (setting frozen) or “Off” (setting
not frozen) for the items of each submenu under function
number 31 (RMFrzTgt) in the “Function Setting Item List”
(page EN-46).
Setting items that can be specified are listed below.
• Rhythm (Rhythm number, Synchro start status, ACCOMP
on/off, Accompaniment volume, Chord input mode)
• Tempo
• Tone (Tone number, Layer (on/off), Split (on/off), Octave
Shift, Duet settings, Keyboard volume)
• Split Point
• Auto Harmonize/Arpeggiator (on/off, type, Arpeggiator hold
on/off)
• Transpose
•Scale
• Touch Response
• Effect type (Reverb, Chorus)
• Controller (Pitch bend range, pedal effect)
• Under initial default settings, Rhythm and Tempo are on
while all other settings are off.
Recalling a Setup from
Registration Memory
Reca l
l
To Next Page
Loading...
Need help?
General
Weight and Dimensions
