Playing on the Keyboard
EN-20
■ To select an arpeggiator type
1.
Perform the procedure under “To turn on the
arpeggiator” (page EN-19) and confirm that the
ARPEG. indicator is displayed.
2.
Long-press cm A.HAR./ARPEG. until the
FUNCTION indicator flashes on the display.
This displays the currently selected arpeggiator type
number and name. The NUM indicator is also displayed.
3.
Use the bo dial to display the arpeggiator type
you want to select.
• While the arpeggiator type is displayed, long-pressing
cm A.HAR./ARPEG. will select the tone that is
recommended for the displayed type.
• For details about arpeggiator types, refer to the
separate “Built-in Music Data Lists”.
4.
Press bp ENTER to apply your setting.
This causes the NUM indicator to disappear.
You can split the keyboard in the center for duet play so the
left and right sides have the same ranges.
The Duet Mode is the perfect way to conduct lessons, with the
teacher playing on the left side as the student plays the same
song on the right side.
Keyboard
Pedal Operation when Playing a Duet
● Optional SP-34 Pedal Unit
The left pedal operates as the left side damper pedal, while
the right pedal is the right side damper pedal.
• Only the damper pedal for the right side keyboard supports
half-pedal operations.
● Supplied SP-3 Pedal Unit
To use the SP-3 Pedal Unit as the right keyboard damper
pedal, connect it to the ct DAMPER/ASSIGNABLE jack. In
the Duet Mode, this pedal functions as a damper pedal for the
right side keyboard, regardless of the effect type assigned to it
with the procedure under “To select the pedal effect” (page
EN-22).
• Half-pedal operation is not supported in this case.
Splitting the Keyboard for Duet
Play
Split point
Left keyboard Right keyboard
(middle C) (middle C)
Left side damper pedal
Left and right side
damper pedal
Right side damper pedal
(Half-pedal operation
supported)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
