Casio CDP-S360 User Manual

EN-61
Reference
Troubleshooting
Symptom Action
Included Accessories
I can’t find something that should be here. Carefully check inside all of the packing materials.
Power Requirements
Power will not turned on. • Check the AC adaptor or make sure that the batteries are facing
correctly (page EN-7).
• Replace the batteries with new ones or switch over to AC adaptor
power (page EN-7).
The display lights up momentarily but power does
not turn on when I press the 1P (Power) button.
Press 1P (Power) firmly and completely to turn on power.
The Digital Piano outputs a loud sound and then
suddenly powers down.
Replace the batteries with new ones or switch over to AC adaptor
power (page EN-7).
The Digital Piano suddenly turns off after some time
when power is left on.
Auto Power off (page EN-9) may have been triggered. Press the
1P (Power) button to turn power back on.
Display
The display keeps going out or are flashing. Replace the batteries with new ones or switch over to AC adaptor
power (page EN-7).
Screen contents are visible only from straight ahead. This is due to production limitations. It does not indicate malfunction.
Sound
Nothing happens when I press any keyboard key. • Adjust the volume setting (page EN-9).
• Check if something is plugged into dl PHONES/OUTPUT jack on
the back of the Digital Piano.
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-9).
Nothing happens or notes do not play normally when
I play notes on the left side of the keyboard.
Press bn [ACCOMP] to disable chord input in the accompaniment
keyboard area (page EN-31).
Nothing happens when I start an Auto
Accompaniment.
• With rhythms 191 to 200, nothing will sound until you play a chord
on the keyboard. Try playing a chord (page EN-31).
• Check and adjust the accompaniment volume setting (page
EN-35).
• If there is no user rhythm stored in memory, Auto Accompaniment
will not start when you press bm START/STOP while a rhythm in
the range of 201 to 210 is selected (page EN-37).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-9).
Nothing happens when I start playback of a built-in
song.
• It takes a little time after you press the button until the song starts to
play. Wait for a moment for the song to start.
• Check and adjust the song volume (page EN-27).
• If there is no user song stored in memory, song playback will not
start when you press bma while a song in the range of 153 to
168 is selected (page EN-40).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-9).
The metronome does not sound. • Check and adjust the metronome volume setting (page EN-18).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-9).
Notes keep sounding, without stopping. • Turn power off and then back on to initialize all Digital Piano
settings (page EN-9).
• Replace the batteries with new ones or switch over to AC adaptor
power (page EN-7).

Casio CDP-S360 Specifications

General

Pedal jack	Yes
Sound effects	Chorus, Flanger/Digital Signal Processing (DSP), Reverberation
Tones quantity	700
RMS rated power	16 W
Number of speakers	2
Chorus effects quantity	4
Maximum polyphony (notes)	128
Music memory capacity (songs)	152
Reverberation effects quantity	10
Keys quantity	88 keys
Number of keyboard sensitivity levels	3
Tuning frequency	415.5 - 465.9 Hz
User presets quantity	310
Recorder/sequencer number of songs	5
Recorder/sequencer number of tracks	6
Product color	Black
Battery type	AA
Power source type	AC, Battery
Power consumption (max)	10 W
Audio input	1
USB connector type	USB Type-A, USB Type-B

Weight and Dimensions

Depth	232 mm
Width	1322 mm
Height	99 mm
Weight	10900 g