Casio CDP-S360 User Manual

Connecting External Devices
EN-58
You can use the Wireless MIDI & audio adaptor (Option: WU-
BT10) to pair the Digital Piano with a Bluetooth audio device
and sound the playback of the external device from the Digital
Piano’s speakers.
• Before performing the pairing operation, turn down the
volume levels of the Digital Piano and the external
device.
• If external device notes sounded by this Digital Piano
are distorted, lower the external device’s volume level.
• Due to Bluetooth characteristics, you may notice some
lag in notes. If that happens, connect using a USB
cable.
■ To pair the Digital Piano with a Bluetooth Audio
Capable Device
1. Connect the Wireless MIDI & audio adaptor to
the cr USB Type A port.
2. On the Bluetooth setting screen that appears
on the external device, turn on the Bluetooth
function if it is off.
3. Press bp FUNCTION.
4. Use the bo dial to display “APairing” and then
press bp ENTER.
5. Use the bo dial to display “Pairing” and then
press bp ENTER.
This causes “Pairing” to flash, which indicates pairing
standby.
• To cancel pairing, press bp ENTER again.
• If the Digital Piano’s wireless function is turned off, it
will turn on automatically.
6. Use the setting screen of the Bluetooth audio
capable device to select “WU-BT10 AUDIO” to
pair with this Digital Piano.
• When pairing is complete, a piano tone sounds as a
notification tone.
• Now output from the external device will sound from
the Digital Piano’s speakers.
• You need to turn on both the Digital Piano’s wireless
function and the Bluetooth audio capable device’s
Bluetooth function.
• To change the Digital Piano’s wireless settings, see
“Enabling and Disabling the Digital Piano’s Wireless
Function” (page EN-60).
• Information about the last Bluetooth audio capable devices
connected to this Digital Piano is registered by the Wireless
MIDI & audio adaptor. Because of this, it can automatically
perform Bluetooth audio pairing with the same device, so
you will not need to perform the Bluetooth audio pairing
operation again.
Sounding a Bluetooth Audio
Capable Device (Bluetooth Audio
Pairing)
Wireless MIDI & audio adaptor
cr USB Type A port

Casio CDP-S360 Specifications

General

Pedal jack	Yes
Sound effects	Chorus, Flanger/Digital Signal Processing (DSP), Reverberation
Tones quantity	700
RMS rated power	16 W
Number of speakers	2
Chorus effects quantity	4
Maximum polyphony (notes)	128
Music memory capacity (songs)	152
Reverberation effects quantity	10
Keys quantity	88 keys
Number of keyboard sensitivity levels	3
Tuning frequency	415.5 - 465.9 Hz
User presets quantity	310
Recorder/sequencer number of songs	5
Recorder/sequencer number of tracks	6
Product color	Black
Battery type	AA
Power source type	AC, Battery
Power consumption (max)	10 W
Audio input	1
USB connector type	USB Type-A, USB Type-B

Weight and Dimensions

Depth	232 mm
Width	1322 mm
Height	99 mm
Weight	10900 g