Connecting External Devices
EN-60
1.
Connect the Wireless MIDI & audio adaptor to
the cr USB Type A port.
2.
Press bp FUNCTION.
3.
Use the bo dial to display “Wireless” and then
press bp ENTER.
4.
Use the bo dial to display “WirlesFn” and then
press bp ENTER.
• Each press of bp ENTER toggles the wireless
function between enabled and disabled.
■ Notification Tones
A change in the Bluetooth connection causes a notification
tone to sound.
1.
Press bp FUNCTION.
2.
Use the bo dial to display “Wireless” and then
press bp ENTER.
3.
Use the bo dial to display “NotifVol” and then
press bp ENTER.
This causes “NUM” to appear.
4.
Use the bo dial to adjust the volume level.
• You can specify a volume level value from 0 to 127.
1.
Press bp FUNCTION.
2.
Use the bo dial to display “Wireless” and then
press bp ENTER.
3.
Use the bo dial to display “Con MIDI” or
“ConAudio”.
• Display “Con MIDI” for a Bluetooth Low Energy MIDI-
capable device, and “ConAudio” for a Bluetooth Audio-
capable device.
• The current connection status is shown on the display.
Enabling and Disabling the Digital
Piano’s Wireless Function
This type of
connection:
Sounds this notification tone:
Connection with a
Bluetooth audio device
Rising piano tone melody
Disconnection from a
Bluetooth audio device
Falling piano tone melody
Connection with a
Bluetooth Low Energy
MIDI device
Rising vibraphone tone melody
Disconnection from a
Bluetooth Low Energy
MIDI device
Falling vibraphone tone melody
Adjusting the Notification Tone
Volume Level
Checking the Bluetooth
Connection Status
Indicator Description
con Connected with supported device
--- Not connected with supported device
To Next Page
Loading...
Need help?
General
Weight and Dimensions
