EN-41
Recording Your Keyboard Play
■ To play back a recorded performance
Use the procedure under “Selecting a Built-in Song for
Playback” (page EN-26), selecting one of the songs in the
range of 163 to 168.
■ To change the recording destination song
number during recording standby
1.
While in record standby, long-press
5 RECORD/STOP.
This causes “Rec Trk” to appear on the display.
2.
Use the bo dial to select “MltRec X” (X is a
value from 1 to 5), and then press bp ENTER.
3.
Use the bo dial to display the number of song
to which you want to record.
4.
Press bp ENTER.
5.
To exit the setting screen, press 5 RECORD/
STOP.
■ To change the target track during recording
standby
1.
While in record standby, long-press
5 RECORD/STOP.
This causes “Rec Trk” to appear on the display.
2.
Press bp ENTER.
3.
Use the bo dial to select the track you want to
record.
4.
Press bp ENTER.
5.
To exit the setting screen, press 5 RECORD/
STOP.
• For details about the recording track, see “About tracks”
(page EN-41).
In addition to the keyboard play and Auto Accompaniment you
record to Track 1, you can overdub up to five keyboard play
tracks.
■ About tracks
Tracks are numbered from 1 to 6.
• If you do not specify a track number when recording,
recording is performed to Track 1 automatically.
In addition to what you play on the keyboard, the information
below also is recorded.
• Track 1
Tone number (Upper1, Upper2, Lower), rhythm number,
rhythm controller, Keyboard Volume, Auto Accompaniment
volume level, tempo, beat, reverb setting, chorus setting,
chord play, layer play, split play, scale setting, octave shift
setting, pedal operations, pitch bend wheel operations,
pitch bend range setting
• Tracks 2 through 6
Tone number (Upper1), pedal operations, pitch bend wheel
operations, pitch bend range setting
■ To record to Tracks 1 through 6
1.
Press bs SONG BANK.
2.
Use the bo dial to display the number of song
to which you want to record.
3.
Press 5 RECORD/STOP.
This causes “Rec Trk” to appear on the display.
• To exit record standby, press 5 RECORD/STOP as
many times as necessary until the RECORD indicator
is no longer displayed.
4.
Press bp ENTER.
5.
Use the bo dial to select the track number of
the next track to which you want to record.
This will enter record standby for the track you selected.
Example: Track 2
• To change the tone to be used at the start of recording,
press bq TONE and then use the bo dial to select the
tone.
6.
Press bp ENTER.
Overdubbing a Recorded Track
Rec T
rk
To Next Page
Loading...
Need help?
General
Weight and Dimensions
