EN-59
Connecting External Devices
■ Deleting Bluetooth Audio Capable Device Pairing
Registration
• Performing the procedure below will delete the pairing
registration between this Digital Piano and its currently
paired Bluetooth audio capable device. If you are
experiencing connectivity problems with a Bluetooth audio
capable device, perform the procedure below and then
perform the procedure under “Sounding a Bluetooth Audio
Capable Device (Bluetooth Audio Pairing)” (page EN-58).
• After performing the procedure below, you should also clear
the Digital Piano connection logs from all of the Bluetooth
audio devices that have been paired with the Digital Piano.
For information about how to do this, refer to the user
documentation of each Bluetooth audio device.
1.
Connect the Wireless MIDI & audio adaptor to
the cr USB Type A port.
• You will not be able to delete a Bluetooth audio paring
registration unless a Wireless MIDI & audio adaptor is
connected to the Digital Piano.
2.
Press bp FUNCTION.
3.
Use the bo dial to display “APairing” and then
press bp ENTER.
4.
Use the bo dial to display “PairgClr” and then
press bp ENTER.
This causes “Sure?” to appear on the display.
• The next step below executes the delete operation. To
cancel the delete operation, long-press bp ENTER.
5.
To execute the delete operation bp ENTER.
This terminates Bluetooth connection.
• If the Digital Piano’s wireless function is turned off, it
will turn on automatically.
You can use the Wireless MIDI & audio adaptor (Option: WU-
BT10) to connect the Digital Piano with a Bluetooth Low
Energy MIDI device.
1.
Connect the Wireless MIDI & audio adaptor to
the cr USB Type A port.
2.
Use the setting screen of app you installed on
your Bluetooth Low Energy MIDI device to
select “WU-BT10 MIDI” and connect with the
Digital Piano.
• When connection is complete, a vibraphone tone
sounds as a notification tone.
• Do not perform any Digital Piano operation while it is in
the process of connecting with a Bluetooth Low Energy
MIDI device.
• You need to turn on both the Digital Piano’s wireless
function and the Bluetooth Low Energy MIDI device’s
Bluetooth function.
• To change the Digital Piano’s wireless settings, see
“Enabling and Disabling the Digital Piano’s Wireless
Function” (page EN-60).
• You need to perform the above connection operation each
time you connect with a Bluetooth Low Energy MIDI device.
• Depending on the device you are using and its operating
system version, connecting with Bluetooth audio and
Bluetooth Low Energy MIDI at the same time may cause
unstable MIDI operation. If this happens, disconnect the
Bluetooth audio.
Connect the Digital Piano with a
Bluetooth Low Energy MIDI
Device
To Next Page
Loading...
Need help?
General
Weight and Dimensions
