20021201
Warning Message Description
k Warning Message Table
α
-10-5
Error Message Table
k Low Memory Error Processing
An error occurs on the ClassPad if it is unable to reserve enough work area memory to
perform a particular operation. When a low memory error occurs, any application in use at
that point is shut down and an error message like the one shown below appears.
Tapping the [OK] button clears the error.
Important!
• To avoid loss of data, you should make it a regular habit to periodically perform the save
operation.
You may lose some of the data you are inputting with an application that shuts down due to a
low memory error. When the low memory error occurs while you are using the eActivity
application to create data, for example, any unsaved data you have input is lost.
Batteries are extremely low!
Replace batteries immediately!
Can’t Solve!
Can’t solve!
Adjust initial value or bounds.
Then try again.
Insufficient memory for unit-to-unit
communication.
Delete unnecessary eActivity contents.
Only the first selected function will be
done.
This operation will make your presentation
files unavailable.
Are you sure?
Time out.
The end of condition was not satisfied.
Too Many eActivity Files
–
–
NumSolve cannot solve an expression.
–
–
–
–
The data communication operation you are
trying to perform is not possible because
there are too many eActivity files.
To Next Page
Loading...
Need help?
General
