To Next Page

To Previous Page

ε-29

Using Program Converter

7. Enter up to eight characters for the password.

• If you change your mind about assigning a password, press J here. This will cause

the password input field to disappear and cancel password input.

8. After everything is the way you want, press w to convert the program in accordance with

the setup.

• The message “Complete!” appears when conversion is complete. To clear the message

and return to the screen that was on the display in step 1, press w or J.

k Converting a CFX-9850 Series Program to a fx-9860G Series/fx-CG10/

fx-CG20/fx-CG20 AU Compatible Program

To use an EA-200 control program created on the CFX-9850 Series calculator (for use on

the CFX-9850) on the

E-CON3, you need to convert the program to an fx-9860G Series/fx-

CG10/fx-CG20/fx-CG20 AU program. Conversion can be performed using the program

converter.

EA-200 Control Program for

CFX-9850 Series

Convert

EA-200 Control Program for

fx-9860G Series/fx-CG10/

fx-CG20/fx-CG20 AU

• To convert a program

1. Transfer the EA-200 control program created for the CFX-9850 Series to the fx-CG10/fx-

CG20/fx-CG20 AU main memory.

• Use the data communication cable to connect its 3-pin serial port to the 3-pin serial port

of the CFX-9850. For details, see Chapter 13 of this manual.

2. Perform step 1 under “To convert a setup to a program” on page

ε-27, which displays the

program converter screen.

3. Press 1(CALC) and then press 4(→38k).

• This displays a list of programs currently in main memory.

4. Use f and c to move the highlighting of the program you want to convert, and then

press 1(EXE) or w.

• A program name input screen will appear after conversion is complete.

5. Enter up to eight characters for the program name.

• If you want to password protect the program, perform steps 6 and 7 under “To convert a

setup to a program” after inputting the program name.

6. Press w to start conversion of the program.

• The message “Complete!” appears when conversion is complete. To clear the message,

press w or J.

Casio FX-CG20 AU User Manual

Questions and Answers: