GETTING ACQUAINTED
E-32
IMPORTANT!
• Never use manganese batteries. Use only the battery
types specifically mentioned in this User’s Guide.
Power Requirements
Your camera features a two-way power supply that lets you
use either AA-size batteries or household AC current.
A set of AA-size alkaline batteries is supplied with the cam-
era. The other items listed below are available separately.
■ Batteries
• Four AA-size alkaline batteries: LR6
• Four AA-size lithium batteries: FR6
• Four AA-size nickel metal hydride rechargeable batteries:
NP-H3
■ Household Current
• AC Adaptor: AD-C620
• AC Adaptor/Charger: BC-3HA
Loading Batteries
Make sure that camera power is turned off whenever loading
or replacing batteries.
1.
On the bottom of the
camera, slide the battery
compartment cover lock
towards the back of the
camera (
11
11
1) to unlock the
cover.
2.
Pressing down on the battery compartment
cover, slide it towards the side of the camera to
release it, and then swing the cover up to open
it (
22
22
2).
3.
Load the batteries so
their plus (+) and minus
(–) ends are facing as
shown in the illustration.
4.
Swing the battery com-
partment cover closed
and then slide it towards
the center of the camera
to secure it in place (
11
11
1).
5.
Slide the battery com-
partment cover lock to-
wards the front of the
camera to lock the cover
(
22
22
2).
2
1
1
2
To Next Page
Loading...
Need help?
General
