BASIC IMAGE RECORDING
E-56
Using the Flash
The following describes various flash settings you can make
to suit the type of image you are trying to record.
1.
Align the POWER/Function Switch with REC.
2.
Press to cycle
through the available
flash modes until the
indicator for the one
you want is on the
monitor screen.
• Each press of cycles through the available flash
modes described below.
BEST SHOT
RESIZE
MF//
Flash
mode
To do this
Have the flash fire automatically
when required (Auto Flash)
Turn off the flash (Flash Off)
Always fire the flash (Flash On)
Fire a pre-flash followed by image
recording with flash, reducing the
chance of red-eye in the image (Red-
eye Reduction)
Select this setting
No display
To Next Page
Loading...
Need help?
General
