BASIC IMAGE RECORDING
E-57
Flash Status Indicators
You can check the current flash unit status by checking the
monitor screen indicator and flash lamp while the shutter re-
lease button is pressed about half way down.
■ Flash lamp
When you press the shutter release button half way, the
flash icon appears on the monitor screen and the Flash lamp
light (amber) to indicate that the flash will fire when the shut-
ter release button is pressed the rest of the way down.
■ Monitor screen
When you have Auto Flash or Red-Eye Reduction selected
as the flash mode, the indicator appears on the display
when you press the shutter release button about half way
down to indicate that available light is insufficient and the
flash will be fired.
MENU
Adjusting the Flash Intensity
Use the following procedure to adjust the intensity of the
flash when it fires.
1.
Align the POWER/Function Switch with REC.
2.
Press MENU.
3.
Select “FUNCTION” “Flash Intensity”, and
then press SET/DISP.
4.
Select the setting you want, and then press
SET/DISP to apply it.
To do this
Fire the flash with strong intensity
Fire the flash with normal intensity
Fire the flash with weak intensity
Select this setting
Strong
Normal
Weak
Flash lamp
To Next Page
Loading...
Need help?
General
