BASIC IMAGE RECORDING
E-48
3.
Compose the image on the monitor screen so
the point on which you want to focus is inside
the Focus frame.
• If you are using the viewfinder to compose the image,
align the viewfinder’s auto focus frame with the sub-
ject you want to focus.
• If you are using the viewfinder to compose the subject,
press SET/DISP twice to turn off the monitor screen.
4.
Press the shutter
release button about
half way and hold it
there to perform auto
focus.
This section describes the basic procedure for recording an
image.
Recording a Simple Snapshot
The camera’s Program AE Mode (P Mode) is for simple
snapshots. In this mode, the camera automatically sets the
shutter speed and aperture for you in accordance with sub-
ject brightness.
1.
Before turning on the camera, remove its lens
cap.
2.
Align the POWER/
Function Switch with
REC.
REC : Turns on power and
enters the REC mode.
PLAY :Turns on power and
enters the PLAY mode.
OFF :Turns off power.
BASIC IMAGE RECORDING
Shutter release button
Focus
frame
REC
OFF
PLAY
To Next Page
Loading...
Need help?
General
