OTHER RECORDING FUNCTIONS
E-73
Registering Your Own Scene Setups
You can register the settings of any image recorded with a
CASIO QV-3500EX camera as a “user setup” for the Best
Shot Mode. After you register a user setup, you can recall it
just as you do with other scenes in the Best Shot Mode.
■ User Setup Parameters
Focus mode, aperture (A and M only), shutter speed (S
and M only), exposure compensation, sensitivity, filter set-
ting, exposure mode, metering mode, white balance, en-
hancement, flash intensity, sharpness, saturation, con-
trast, flash mode
■ Supported Camera Models
You can use only images recorded with the CASIO QV-
3500EX to register a user setup.
■ Number of User Setups
You can register up to 250 user setups (including images
imported form the bundled CD-ROM to the memory card).
Specifying the Location of Best Shot Mode Scene Images
You can use the following procedure to specify the location
of the Best Shot Mode scene images.
1.
Align the POWER/Function Switch with REC.
2.
Press MENU.
3.
Select “FUNCTION” “Best Shot setting” and
then press SET/DISP.
4.
Select the setting you want, and then press
SET/DISP.
NOTES
• If there are no Best Shot Mode sample images on the
memory card, you will be able to select from among
the 28 built-in sample images only, even when the
Built-in+CF or CF option is selected.
• See page E-74 for information about storing sample
images on a memory card.
Select this
Built-in+CF
Built-in
CF
To have this appear when you scroll
through sample scenes
28 built-in sample scenes, followed by
sample scenes on the memory card
28 built-in sample scenes only
Sample scenes on the memory card only
To Next Page
Loading...
Need help?
General
