Cisco 8831 Administration Guide

To enable or disable access to the web pages for a conference phone, follow these steps from Cisco Unified
Communications Manager Administration:
Procedure
Step 1
Choose Device > Phone.
Step 2
Specify the criteria to find the phone and click Find, or click Find to display a list of all phones.
Step 3
Click the device name to open the Phone Configuration web page for the device.
Step 4
In the Product Specific Configuration Layout area, from the Web Access drop-down list, choose Enabled or
Disabled.
Step 5
Click Update.
Some features, such as Cisco Quality Report Tool, do not function properly without access to the
conference phone web pages. Disabling web access also affects any serviceability application that
relies on web access, such as CiscoWorks.
Note
Device Information area
The Device Information area on a conference phone web page displays device settings and related information
for the conference phone. The following table describes these items.
To display the Device Information area, access the web page for the conference phone as described in the
Access web page section, and then click the Device Information hyperlink.
Table 31: Device Information area items
Item
Media Access Control (MAC) address of the conference phone.MAC Address
Unique, fixed name that is automatically assigned to the conference phone
based on its MAC address.
Host Name
Directory number assigned to the conference phone.DN
Version of the firmware running on the conference phone.Version
Revision value of the conference phone hardware.Hardware Revision
Serial number of the conference phone.Serial Number
Model number of the conference phone.Model Number
Indicates if there is a voice message waiting for this conference phone.Message Waiting
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0
115
Remote monitoring
Device Information area

Cisco 8831 Specifications

General

Brand	Cisco
Model	8831
Category	IP Phone
Language	English