Cisco 8831 Administration Guide

To ChangeDescriptionOption
For more information about this file, see
“Configuring the Cisco ITL Client” chapter in
the Cisco Unified Communications Manager
Security Guide.
Displays a submenu of options. Select an
option to view its ITL setting information:
•
ITL Signature: MD5 hash of the
ITL file.
•
Unified CM/TFTP Server
•
CAPF Server
•
TVS
ITL File
Displays the call manager/TFTP
certificate information.
Call
Manager/TFTP
Server
802.1X Authentication and Status menus
The 802.1X Authentication and 802.1X Authentication Status menus allow you to enable 802.1X authentication
and view transaction status. These options are described in the following tables.
To exit these menus, press Exit.
Table 22: 802.1X Authentication settings
To ChangeDescriptionOption
Set 802.1X Device Authentication,
on page 73
Determines whether 802.1X
authentication is enabled:
•
Enabled: Phone uses 802.1X
authentication to request
network access.
•
Disabled: Default setting in
which the phone uses CDP to
acquire VLAN and network
access.
Device Authentication
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager
9.0
72
Cisco Unified IP Conference Phone 8831 settings
802.1X Authentication and Status menus

Cisco 8831 Specifications

General

Brand	Cisco
Model	8831
Category	IP Phone
Language	English