Cisco 8831 Administration Guide

To ChangeDescriptionOption
Set DNS server, on page 67Primary Domain Name System (DNS)
server (DNS Server 1) and optional backup
DNS servers (DNS Server 2–5) used by the
phone.
DNS Server 1
Set Alternate TFTP, on page
68
Indicates whether the phone is using an
alternative TFTP server.
Alternate TFTP
Set TFTP Server 1, on page 68Primary Trivial File Transfer Protocol
(TFTP) server used by the phone. If you are
not using DHCP in your network and you
want to change this server, you must use the
TFTP Server 1 option.
If you set the Alternate TFTP option to yes,
you must enter a nonzero value for the TFTP
Server 1 option.
TFTP Server 1
Set TFTP Server 2, on page 69Optional backup TFTP server that the phone
uses if the primary TFTP server is
unavailable.
TFTP Server 2
Release DHCP address, on
page 69
Releases the IP address assigned by DHCP.DHCP Address Released
Set DHCP
Procedure
Step 1
Unlock network configuration options.
Step 2
Choose Apps > Admin Settings > Network Configuration > DHCP Enabled.
Step 3
Set Enable to Yes. To disable DHCP, set Enable to No.
Step 4
Press Select, and then press Save.
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0
65
Cisco Unified IP Conference Phone 8831 settings
Set DHCP

Cisco 8831 Specifications

General

Brand	Cisco
Model	8831
Category	IP Phone
Language	English