Cisco Unified IP Phone setup in Cisco Unified Communications Manager
To add conference phones to the Cisco Unified Communications Manager database, you can use:
•
Autoregistration
•
Cisco Unified Communications Manager Administration
•
Bulk Administration Tool (BAT)
•
BAT and the Tool for Auto-Registered Phones Support (TAPS)
For more information about these choices, see Cisco Unified Communications Manager IP Phone addition
methods, on page 41.
For general information about configuring conference phones in Cisco Unified Communications Manager,
see
• “Cisco Unified IP Phones”, Cisco Unified Communications Manager System Guide
• “Cisco Unified IP Phone Configuration”, Cisco Unified Communications Manager Administration Guide
• “Autoregistration Configuration”,Cisco Unified Communications Manager Administration Guide
Related Topics
Set up Cisco Unified IP Conference Phone 8831 in Cisco Unified Communications Manager administration,
on page 29
Set up Cisco Unified IP Conference Phone 8831 in Cisco Unified Communications Manager
administration
The following steps provide an overview and checklist of configuration tasks for the conference station in
Cisco Unified Communications Manager Administration. The steps present a suggested order to guide you
through the conference phone configuration process. Some tasks are optional, depending on your system and
user needs. For detailed information, see the sources listed.
Procedure
Step 1
Gather the following information about the conference station:
•
Conference phone model
•
MAC address
•
Physical location of the conference station
•
Name or user ID of conference station user
•
Device pool
•
Partition, calling search space, and location information
•
Directory number assigned to the conference phone
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0
29
Cisco Unified IP Conference Phone 8831
Cisco Unified IP Phone setup in Cisco Unified Communications Manager
To Next Page
Loading...
Need help?
General
