Name: Cisco 8831
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Password protection

You can apply a password to the phone so that no changes can be made to the administrative options on the

conference phone unless the password is entered on the Admin Settings phone screen.

Apply password

To apply a password to the conference phone, perform these steps:

Procedure

Step 1

In Cisco Unified Communications Manager Administration, navigate to the Common Phone Profile

Configuration window using Device > Device Settings > Common Phone Profile.

Step 2

In the Local Phone Unlock Password option, enter a password.

Step 3

Apply the password to the common phone profile used by the phone.

Value input and editing guidelines

When you edit the value of an option setting, follow these guidelines:

•

Use the keys on the keypad to enter numbers and letters.

•

To enter letters by using the keypad, use the corresponding number key. Press the key one or more times

to display a particular letter. For example, press 2 once for “a”, twice quickly for “b”, and three times

quickly for “c”. After you pause, the cursor automatically advances to allow you to enter the next letter.

•

To enter a period (for example, in an IP address), press * on the keypad.

•

To enter a plus (+), for international dialling, press and hold the * key for at least 1 second.

•

Press the up arrow on the navigation bar to move the cursor to the left most character, and press the

down arrow on the navigation bar to move the cursor to the right most character.

•

Press if you make a mistake. This softkey deletes the character to the left of the cursor.

•

Press Cancel before pressing Save to discard any changes that you have made.

The Cisco Unified IP Conference Phone provides several methods you can use to reset or restore option

settings, if necessary. For more information, see Reset or Restore.

Note

Cisco 8831 Administration Guide

Other manuals for Cisco 8831