Buttons and hardware
The Conference Phone has two primary components:
•
Display Control Unit (DCU)
•
Sound Base
In addition, the following optional extension kits can be added to or used with the conference phone:
•
Wired Microphone Extension Kit
•
Wireless Microphone Extension Kit and Charger
For your conference phone to work, it must be connected to the corporate IP telephony network.
Display Control Unit
The Display Control Unit (DCU) is tethered to the Sound Base via a micro USB connector.
You can use the graphic and table below to identify buttons and hardware on the DCU.
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager
9.0
8
Cisco Unified IP Conference Phone 8831
Buttons and hardware