Updated SectionRevision
Connect to a Preconfigured Wi-Fi
Network
Added Connect to a Pre-Configured Wi-Fi Network
New Information for Firmware Release 11.0
The following table describes changes to this book to support Firmware Release 11.0.
Table 9: Cisco IP Phone 8800 User Guide revisions for Firmware Release 11.0.
Updated SectionRevision
Change the Font SizeRemoved references to specific font size.
Add Yourself to a Call on a Shared LineUpdated the following section for improved Barge
and Merge support.
Report All Phone IssuesRevised the following section for the improved
Problem Report Tool support.
Turn On Do Not DisturbAdded new icon to the following section for Do Not
Disturb(DND).
Connect to ExpresswayUpdated the following section for Welcome screen.
Phone Setup
Typically, your administrator sets up your phone and connects it to the network. If your phone is not set up
and connected, contact your administrator for instructions.
Adjust the Handset Rest
If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the
handset rest to ensure that the receiver does not slip out of the cradle.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
