Cisco 8851NR User Manual

When you add more than one person to a conference call, wait a few seconds between adding participants.
As the conference host, you can remove individual participants from the conference. The conference ends
when all participants hang up.
Add Another Person to a Call
When you add more than one person to a call, wait a few seconds between adding participants.
Procedure
Step 1 From an active call, press Conference .
Step 2 Add the other person to the call by doing one of the following:
• Press Active calls and select a held call.
• Enter the phone number and press Call.
Step 3 Press Conference.
Swap Between Calls Before You Complete a Conference
You can talk to a person before you add them to a conference. You can also swap between the conference
call and the call with the other person.
Procedure
Step 1 Call a new conference participant, but do not add the participant to the conference.
Wait until the call is connected.
Step 2 Press Swap to toggle between the participant and the conference.
View and Remove Conference Participants
If you create a conference, you can view the details of the last 16 participants who join the conference. You
can also remove participants.
Procedure
Step 1
Step 2
While you are in a conference, press Show Details to view a list of participants.
(Optional) Highlight a participant and press Remove to drop the participant.
CISCO 8800 SERIES
USER GUIDE
GoMomentum.com
888.538.3690
54

Cisco 8851NR Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Case material	Acrylonitrile butadiene styrene (ABS)
Product color	Charcoal
Wall mountable	Yes
Lines quantity	5 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Volume control	Digital
Display diagonal	5 \
Display resolution	800 x 480 pixels
Voice codecs	G.711Mu, G.711a, G.722, G.729A, iLBC
Number of microphones	1
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	IEEE 802.3i/802.3u/802.3ab
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Number of handles included	- pc(s)

Weight and Dimensions

Depth	257.34 mm
Width	229.1 mm
Height	40 mm
Weight	1190 g