Cisco 8851NR User Manual

Place a Call on Hold with Assisted Directed Call Park
You can park and retrieve an active call using a dedicated call park number. Using assisted directed call park,
you use a button to park an active call. Your administrator sets up the button as a speed-dial line. With this
type of directed call, you can use line status indicators to monitor the status of the line (in-use or idle).
Procedure
Press BLF Directed Call Park on a line that displays an idle line status indicator for an assisted directed call
park.
Retrieve a Call on Hold with Assisted Directed Call Park
Procedure
Press BLF Directed Call Park.
Place a Call on Hold with Manual Directed Call Park
You can park and retrieve an active call using a dedicated call park number. Using manual directed call park,
you transfer an active call to a directed call park number, which your administrator sets up.
Procedure
Step 1 Press Transfer .
Step 2 Required: Enter the directed call park number.
Step 3 Required: Press Transfer again to park the call.
Retrieve a Call on Hold with Manual Directed Call Park
You can pick up a call that was parked to a dedicated call park number.
Before you begin
You need the directed call park number and the park retrieval prefix.
Procedure
Step 1 Dial the park retrieval prefix.
Step 2 Dial the directed call park number.
CISCO 8800 SERIES
USER GUIDE
GoMomentum.com
888.538.3690
52

Cisco 8851NR Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Case material	Acrylonitrile butadiene styrene (ABS)
Product color	Charcoal
Wall mountable	Yes
Lines quantity	5 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Volume control	Digital
Display diagonal	5 \
Display resolution	800 x 480 pixels
Voice codecs	G.711Mu, G.711a, G.722, G.729A, iLBC
Number of microphones	1
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	IEEE 802.3i/802.3u/802.3ab
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Number of handles included	- pc(s)

Weight and Dimensions

Depth	257.34 mm
Width	229.1 mm
Height	40 mm
Weight	1190 g