View the Progress of a Phone Firmware Upgrade
During a phone firmware upgrade, you can view the upgrade progress.
Procedure
Step 1 Press Applications .
Step 2 Select Phone information > Show detail.
Step 3 Press Exit.
Energy Savings
Your administrator can reduce the amount of power your phone screen uses when you're not using your phone.
Your administrator can set up these energy-saving levels on your phone:
• Power Save—The backlight or screen turns off when the phone is inactive for a set interval.
• Power Save Plus—Your phone screen turns on and off at times that are based on your work schedule. If
your work hours or work days change, you can contact your administrator to reconfigure your phone.
For example, your administrator can set your phone to alert you 10 minutes before it turns off. You see the
Select button light up and you get a message that your phone is turning off soon. You get notifications at these
intervals:
• Four rings at 10 minutes before power off
• Four rings at 7 minutes before power off
• Four rings at 4 minutes before power off
• 15 rings at 30 seconds before power off
If your phone is active, it waits until it has been inactive for a set interval before it notifies you of the pending
power shutdown.
Turn On Your Phone
When your phone turns off to save energy, the phone screen is blank and the Select button lights up.
Procedure
Press Select to turn your phone back on.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
